The T6300A is a handheld all-in-one PRI and network testing instrument, integrating Ethernet, E1/PRI, V.35/V.24, OTDR, and optical power meter functions in a single device. It simplifies testing, troubleshooting, and maintenance of both traditional telecom and modern IP/fiber networks.
Product Features:
📌 All-in-One Multi-Interface Testing
Combines Ethernet (10/100/1000M), E1/PRI, V.35/V.24, OTDR, and optical power meter into a single handheld device. Eliminates the need to carry multiple testers, improving efficiency and reducing costs.
📌 RFC2544 Network Performance Testing
Supports throughput, latency, jitter, frame loss, and back-to-back testing up to Gigabit speeds. Dual-port and loopback modes allow accurate end-to-end performance validation, essential for SLA verification.
📌 PRI & E1 Testing with 30B+D Signaling
Provides real-time verification of ISDN PRI signaling, call simulation, monitoring, and analysis of voice and data channels. Ensures quick diagnosis of line faults in PBX and carrier networks.
📌 Integrated Fiber Testing
Built-in OTDR (1550nm) and optical power meter (800–1700nm) allow fiber fault location, loss measurement, and connector inspection without additional devices. Ideal for FTTx and optical network maintenance.
📌 Dual Ethernet & Optical Ports with Auto-Detection
Independent dual 10/100/1000M copper ports and dual SFP optical ports automatically detect network speed and duplex mode. Supports testing of both copper and fiber connections for LAN and carrier networks.
📌 Long Battery Life & Data Storage
6000mAh battery provides up to 6 hours of continuous operation. Stores up to 1000 test results with USB/TF card export options for easy reporting and documentation.
Spec Sheet
| 10/100/1000M Gigabit Ethernet |
| Provides 10/100/1000M electrical port and 100/1000M optical port connectivity verification services |
| Dual optical and electrical ports, the optical port supports 850/980/1300/1310/1490/1550nm |
| Statistics on packets sent, received, error packets, packet loss and packet loss rate |
| Support RFC2544 Layer 1/Layer 2/Layer 3 testing functions |
| RFC2544 standard test: packet loss rate test, throughput test, latency test, back-to-back test, up to Gigabit line speed |
| Provides Ethernet link fast traffic PING and loopback PING, jumbo frame and jumbo packet PING tests |
| Support IP RAN test, physical loopback, layer 2 loopback, layer 3 loopback, layer 4 loopback FTP bandwidth test, network discovery, packet capture analysis, route tracking, ARP scanning |
| Fine flow monitoring in through-flow mode |
| DHCP automatically obtains and configures an IP address |
| Loop discovery display |
Where It's Used
Telecom Field Installation & Commissioning
Enables single-device testing for PRI, Ethernet, and fiber, accelerating line activation and reducing the need for multiple tools.
Enterprise Network SLA Verification & Troubleshooting
Provides RFC2544 performance testing to validate network throughput, latency, and service-level compliance, pinpointing bottlenecks efficiently.
ISP/MSP Network Maintenance & Fault Location
Integrated OTDR and optical power meter simplify fiber fault detection, loss measurement, and connector inspection, reducing MTTR in FTTx deployments.
PRI/ISDN Line Troubleshooting
Real-time analysis of 30B+D signaling allows technicians to test voice and data channels on-site, minimizing dependency on remote support.
Multi-Vendor & Legacy Network Interoperability Testing
Supports mixed interfaces (Ethernet, E1, V.35/V.24, fiber) for seamless testing across diverse equipment, ensuring smooth integration and network upgrades.
Package Content
- T6300A Tester
- Power Adapter & Charging Cable
- Ethernet Test Cables (RJ45)
- E1 Test Cable (BNC & RJ48)
- V.35/V.24 Test Cable (DB26)
- Optical Power Meter Adapter & Fiber Connectors
- User Manual & Quick Start Guide
- Protective Carrying Case
- TF Card (8GB, Pre-installed)